SVS SB1000 vs SB2000 – Which is Better? (2022)


This article will compare the SVS SB 1000 vs SB 2000. You will be reading about their sound quality, build quality, key features, how to set them up, and which of the two is best for your needs. 

SVS SB 1000

Sound quality

SVS SB-1000 Pro Sealed Subwoofer (Black Ash)

SVS packed a front-terminating 12-inch driver, massive twin ferrite magnets, and FEA-advanced inner engine innovation into the smaller SB-1000 subwoofer for tremendous performance with exceptionally low distortion. 

The long-stroke driver’s lightweight cone material replicates unpretentious sound tones and massive low recurrence sway with equal realism. 

Strong elastic covers ensure long-term performance, even when the subwoofer is pushed to its limits for extended periods. Genuine and harmonious, the SB-1000 is excellent for true music or home theater fans.

The Sledge STA-300D intensifier, rated at 300 watts RMS and 700+ watts peak output, keeps up with precise control of the subwoofer at all drive levels, allowing you to push to reference volumes without bending. 

The SVS SB 1000’s leveling bend has been increased for improved transient responsiveness and room gain, making the subwoofer sound much larger than its size. 

Its ability to start and stop in a short space while maintaining consistency with the source material is a presentation characteristic usually reserved for far more expensive subwoofers. 

Additionally, the high-level DSP motor also addresses sound playback calibration and easy set-up and integration into any home theater or sound system.

You won’t be overwhelmed by the clarity this device accentuates when listening to music as loud as 78db. Even when the gain is turned up, the audio remains clear, pleasant, and tight. 

Because there is no port, there was no port noise. Its foundation was right there. It stops and begins on a dime, which a subwoofer should do.

The SB 1000 subwoofer delivers the same intimate, nuanced presentation as music when it comes to movies. 

This little cube, measuring 13 by 13 inches, pumped out enormous bass that could shake a couch. With no distortion, it sounded tight and clean.

Here is a sound test of the SB1000:

SVS SB1000 Sound Test

Build quality

Warm management is essential when working with a powerful intensifier and engine in a tiny fixed cabinet. Therefore SVS designed an outstanding vented post piece and a capable high-power voice loop to maintain the SB-1000 subwoofer temperature without hurting performance or distortion. 

The desk is rigidly braced and musically passive, so the bass you hear is natural and pure, even at the highest driving settings. 

Weighing in at an easily transportable 27 pounds, the SB-1000 is SVS’s smallest and smallest subwoofer, enabling its 24Hz to 260Hz (+/ – 3dB) recurrence response to be even more notable.

Its grille is visible from the front and covers the full front face, with the SVS emblem at the bottom. Pull the grille off with a simple tug, and it will come off. 

The pins on each of the four corners keep it in place, the grille is attractive, stiff, and sturdy, and the piano black surface finish surrounds the large 12-inch subwoofer when the grille is removed. 

There’s no port because it’s sealed, and the subwoofer occupies nearly the whole front face. The SVS logo may be seen in four corners surrounding the front and rubber surround and in the middle.

A little LED light in the upper left corner indicates the status. When the subwoofer is turned off, it is red; when it is turned on, it is blue. When the grille is in place, the LED is hidden. However, this is a neat appearance.

Moving around to the rear, it has the same glossy black surface all the way around, with the connectors and controls in the center, where the SVS logo and serial number are positioned.

SVS SB-1000 Pro Sealed Subwoofer (Black Ash)

Key Features

  • 300 watts RMS Amplifier (720 watts peak)
  • 24-260 Hz ±3dB Frequency Response
  • SVS 12″ high-performance driver
  • Dual high-grade ferrite magnets
  • Input impedance – 47 kΩ (unbalanced RCA)

Setting Up

1. Join the MLP to the sub.

2. To determine the best location, do a sub crawl (Yes, this is different than a pub crawl. But feel free to have a few beers while you do it ;)).

3. Place the sub in that position.

4. Calculate with only the first mic location specified in Audyssey.

5. Check where Audyssey has set your sub trim; it should be between -5db and -8db.

6. As needed, increase or reduce the sub’s gain.

7. Rep steps 4-6 until the sub trim is between -5 and -8 decibels.

8. Finish the Audyssey calibration process.

9. To taste, increase the sub trim by 3 to 6 dB.

10. Enjoy your sound system.

Summary 

The SVS SB1000 is an excellent example of a small but powerful subwoofer. It’s one of SVS’s two subwoofer lines for the entry-level/small-size market. 

As you might think, it’s a little but powerful subwoofer that redefines the term “value for money.” The SVS SB1000 might be the correct solution if you have limited space and want to make the most of it. 

SVS SB 2000

Sound quality

SVS SB-2000 Pro 550 Watt DSP Controlled 12' Sealed Subwoofer (Piano Black)

The SB2000 will make your listening experience more enjoyable no matter what music or movies you enjoy. In any case, the SB-2000 captures all of these bass tones with astonishing delicacy and complexity. 

The expressive force of this miniature vessel considerably outweighs its weight, and it can preserve detail and control. 

It can produce a whole subsurface roar in heavily sound-designed film scores without interfering with conversation or other ambient noises. 

The SB-2000 performs admirably, displaying uncommon accuracy and musicality for a subwoofer in this price range. 

This small subwoofer will not let you down whether you’re watching movies or listening to music. It provides precise control over in-depth and detailed bass. 

As a result, SB2000 is an excellent first option in the quest for movie sound quality, particularly in the everyday usage of music programs or music movies. The likelihood of difficulties such as standing waves for some small space users is minimal.

Here is a sound test of the SB2000:

SVS SB2000 Sound Test

Build quality

The SB-2000 Pro features innovation from the industry-leading SVS 16-Ultra Series, which has won virtually every industry and media award as the best subwoofers globally. 

It delivers incredible results and expansion without sacrificing driver control or precision in recurrent responsiveness. 

Its permanent cabinet arrangement combines the most complicated SVS subwoofer innovation ever devised with cutting-edge research to set a new performance standard for subwoofers in terms of cost.

A 15-pound double ferrite magnet engine assembly produces massive amounts of magnetics, allowing for a thrilling driver experience without entirely letting go. It easily achieves augmentation below 20 Hz without distorting.

Even at the highest driving levels, the lightweight and inflexible aluminum vented cone with composite fiber dust cover produces room-invigorating SPLs while maintaining control.

Long-toss illustrative encompass employing restricted infusion formation allows for an amazing bass trip while extending the life of the drive unit.

The expansion of the aluminum shaft component improves the warm administration features for exceptional heat scattering, and the double-layer voice curl arrangement improves linearity and precision throughout the voyage while reducing mutilation and power pressure.

The SB-2000 is a small sealed subwoofer with a simple chevalier design. Its curved edges and black-gray finish are appealing, and the manufacturing quality is great. 

You can also notice that its body is composed of durable MDF wood and sits on rubber feet that are screwed in. 

This subwoofer has a modest footprint, measuring 37 x 36 x 43cm, but it packs a punch at 16kg

A curving mesh grille provides a contemporary twist to the conventional subwoofer design on the front. It also covers the SB-2000’s 12-inch front gearbox, which is handy but not essential for families with children or pets.

SVS created the powerful drive unit on its own. Over 20 distinct samples were generated until the ultimate satisfaction, including 100 hours of full power testing, which considerably reduced distortion. 

The SB-2000 uses the Sledge STA-500D DSP amplifier, which has a Class D topology and is very efficient. 

Its module has a nominal continuous output of 500 watts RMS. However, its max output power may reach 1100 watts. The power amplifier promotes the bass unit by delivering double the peak power output.

The base unit has been improved in addition to the power amplifier component. The unit’s diaphragm is reinforced using Nomax material, which makes the diaphragm lighter and more durable. 

In the event of high power output, this significantly lowers sound distortion produced by diaphragm deformation. 

A heavy-duty voice coil with a 2-inch diameter and an updated suspension for improved linearity and control are also included.

Under any working situation, DSP control may give a precise reaction and particular behavior. According to SVS, the SB-2000’s low frequency increased to 19Hz.

SVS SB-2000 Pro 550 Watt DSP Controlled 12' Sealed Subwoofer (Piano Black)

Key Features

  • 500 watts RMS Amplifier (1100 watts peak)
  • 19-220 Hz ±3 DB Frequency Response
  • SVS 12″ 2000-series driver
  • Dual high-grade ferrite magnets
  • Sledge STA-500D DSP amplifier
  • Input impedance – 47 kΩ (unbalanced line-level RCA)

Setting Up

1. Connect the sub to the MLP.

2. Perform a sub crawl to find the optimal place.

3. Put the sub in that spot.

4. Run Audyssey with only the first mic location selected and “calculate.”

5. Check where Audyssey has set your sub trim; ideally, it should be about -5db to -8db.

6. Increase or decrease the sub’s gain as appropriate.

7. Repeat steps 4-6 until the sub trim is about -5db to -8db.

8. Complete the Audyssey calibration.

9. Increase the sub trim by 3 to 6 dB to your liking.

10. Enjoy!

Summary 

SB2000 features a new qualitative leap based on the original 12-inch closed subwoofer. It is small in size, strong in output, has superb sound quality, and has many other benefits. 

The SVS SB2000 gives you the impression that it’s tiny. But its penetrating power can double that of a standard subwoofer, making it ideal for small and medium-sized venues.

SB2000 is known for its rapid, clean, clear, and strong style. It’s a subwoofer that focuses on the low-frequency texture.

Which is better?

The differences between SVS SB-1000 and SB-2000 are based on a few factors. Sound quality, pricing, deeper extension, and so on are some factors that you should consider while comparing the two solutions.

They can still provide superior service, but it now relies on your preferences and money. In comparison to the SB 1000, the SVS SB-2000 offers a wider frequency response range. However, it costs more than the SVS SB-1000 sub. 

An SB-2000 sub will likely set you back roughly $200 more. Sound quality is crucial when selecting the best subwoofer to enhance your home entertainment experience.

As a result, several customers claim that the SB-2000 sub delivers high-quality audio. On the other hand, the SVS SB-1000 should not be overlooked because, for the price, it provides excellent sound quality.

Shawn Shepherd

Hi, I'm the owner of the Hifi Guide and have been an audio lover enthusiast for over 16 years. I have a Bachelor's degree in Sound Engineering and I work on producing content for the Hifi Guide in my spare time. My love for audio stemmed from my Dad who was an audio technician, and now I share my knowledge here on this website!

Recent Posts

Want a chance to enter our monthly giveaway?Sign up below!

Win anything from speakers, headphones and soundbars, no catch!